In-dash motorized multimedia/mp3/cd am/fm receiver with 7-inch widescreen touchscreen tft monitor with full ipod control with usb and sd memory ports and av input (25 pages)
Bluetooth-enabled in-dash single din am/fm dvd/mp3/cd receiver with 7-inch widescreen touchscreen digital tft monitor with dual (front and rear) usb and sd memory port and aux input (10 pages)
Bluetooth-enabled double-din dvd/mp3/cd receiver with 6.2" widescreen touchscreen tft digital monitor usb and sd memory card port and front panel aux input (10 pages)
Bluetooth -enabled double-din dvd/mp3/cd receiver with 6.2'' widescreen touchscreen tft digital monitor usb and sd memory card port and front panel aux input (10 pages)
GENERAL CONTROLS POWER Press any button to turn unit ON. To turn head unit off, press and hold POWER. OPEN Press to flip down the front panel. DISP Selects radio frequency or clock display. To set the clock: BLUETOOTH 1. With clock display selected, hold down (DISP) button until SPEAKER clock display starts flashing.
RADIO CONTROLS AUDIO CONTROLS SEEK MODE When press this button for more than 2 seconds, it is activated as selecting mode of these function. AUDIO BUTTON and ROTARY CONTROL Press the button repeatedly to access Volume, Bass, Treble, Balance and Fader functions. Then use the SEEK 1: When SEEK 1 mode is activated, AUTO SEEK SCAN is stopped when station is knob to adjust the selected function.
CD/MP3 PLAYBACK CONTROLS How to select MP3 files +10 10 TRACK UP SELECT: TUNE/TRACK BUTTONS Press and release (In case of MP3 files) to advance to next track or to return to the -10 10 TRACK DOWN SELECT: beginning of the current track (track number (In case of MP3 files) will be displayed).
USB and SD/MMC operations Insert SD/MMC card into the card slot. Support MP3 ID3 format music only. POWER Use to turn the CD receiver ON or OFF. AUDIO Turning the VOL knob Right or Left, you can adjust VOL/BASS/TREB/BAL/FAD. To select other functions, press the AUDIO button shortly until the desired functions is shown on the display.
How to use Bluetooth in your Car Audio 1. You need to connect your mobile phone and car audio by pairing. A. Press (+) button in Bluetooth Remote Box longer than 6 seconds. The LED in Remote Box will blink fast. This mode is Pairing mode stage.
Page 9
87.5 to 107.9 MHz 530-1710KHz 450 KHZ Usable Sensitivity 35dB V 178(W) x 159(D) x 51(H) mm Instructions on environment protectionDo not dispose of this product in the usual household garbage at the end of its life-cycle; hand it over at a collection point for the recycling of electrical and electronic appliances.
Need help?
Do you have a question about the P255B and is the answer not in the manual?
Questions and answers