Setting The Dimmer (Dimmer); Selecting The Illumination Color (Illumination Color); Switching The Rear Speaker Output (Rear Speaker Out) - Pioneer DEH-P90DAB Operation Manual

Initial Setting

Setting the Dimmer (Dimmer)

To enable this product's display from being too bright at night, when the vehicle's head
lights are turned ON the display is dimmed.
You can switch this function ON/OFF.
1. Press the FUNCTION button and select the Dimmer mode (Dimmer) in the
Initial Setting Menu.
2. Switch the Dimmer ON/OFF
with the 5/∞ buttons.

Selecting the Illumination Color (Illumination Color)

This product is equipped with two illumination colors, green and red.
You can select the desired illumination color.
1. Press the FUNCTION button and select the Illumination Color mode
(Illumination Color) in the Initial Setting Menu.
2. Select the desired illumination
color with the 2/3 buttons.

Switching the Rear Speaker Output (Rear Speaker Out)

This product's rear speaker leads can be used for full-range speaker ("Full Range output")
or Subwoofer ("Sub woofer output") connection. If you switch Rear Speaker Lead setting
to the "Sub woofer output", you can connect a rear speaker lead directly to a Subwoofer
without using an auxiliary amp.
1. Press the FUNCTION button and select the Rear Speaker Output mode
(Rear Speaker Out) in the Initial Setting Menu.
2. Select the desired Rear
Speaker Out with the 5/∞ but-
tons.
Note:
• When no Subwoofer is connected to the rear speaker lead, select "Full Range output".
• Even if you change to "Sub woofer output", there is no output unless you switch the Subwoofer
Output (refer to page 55) in the Audio Menu ON.
65