Display Assembly - HP Pavilion g7 Maintenance And Service Manual

Display assembly

NOTE: The display assembly spare part kit includes webcam, two microphones, and wireless
antenna transceivers and cables).
Description
43.9 cm (17.3 in), HD, LED, BrightView display assembly (includes webcam, two microphones, and wireless antenna
transceivers and cables)
Butter gold
Charcoal gray
Pewter
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
●
Optical drive (see
●
Hard drive (see
●
WLAN module (see
●
Keyboard (see
●
Top cover (see
Remove the display assembly:
1. Disconnect the display panel cable (1) from the system board.
2. Release the wireless antenna cables (2) from the clips and the opening in the base enclosure.
CAUTION:
support the display assembly can result in damage to the display assembly and other
computer components.
3. Remove the three Phillips M2.5×6.0 screws (3) that secure the display assembly to
the computer.
Battery on page
Optical drive on page
Hard drive or SSD on page
WLAN module on page
Keyboard on page
Top cover on page
Support the display assembly when removing the following screws. Failure to
37), and then remove the following components:
39)
41)
45)
47)
50)
Component replacement procedures
Spare part number
640223-001
640226-001
640227-001
75