Turning The Navigation System On And Selecting A Source; Loading A Disc - Pioneer AVIC-X1BT Hardware Manual

VOLUME/ATT button
m
Rotate to increase or decrease the volume. Press
to quickly lower the volume level by about 90%.
Press once more to return to the original volume
level.
n LCD panel
o LCD screen
Front panel
p
Turning the Navigation System
On and Selecting a Source
• If the program is not installed, see Opera-
tion Manual and install the program.
1
Turn the ignition switch (ACC) ON.
The navigation system's power supply comes
on.
2
Press the SRC button to select a source.
Press the SRC button repeatedly to switch
between the following sources:
"RADIO" (tuner) — "TV" (television) — "AV"
(video input) — "DISC" [CD, MP3, CD/
MP3](built-in DVD drive) — "S-DVD" (DVD
player/multi-DVD player) — "M-CD" (multi-CD
player) — "iPod" (iPod) — "EXT-1" (external
unit 1) — "EXT-2" (external unit 2) — "AUX"
(Auxiliary equipment) — "TEL" (hands-free
phoning)
❒ Press and hold to turn the source off.
❒ In the following cases, the sound source can-
not be used:
— When a unit corresponding to each source
is not connected to this product.
— When no disc (DVD-Video, CD) is set in this
product.
— When no disc is set in the DVD-player ("S-
DVD").
— When no magazine is set in the multi-CD
player.
— When no magazine is set in the multi-DVD
player.
— When "AUX" (auxiliary input) is set to off
(refer to Operation Manual).
— When "AV INPUT" (video input) is not set
to "VIDEO" (refer to Operation Manual).
❒ External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this product. Two external
units can be controlled by this product. When
two external units are connected, the product
allocates them to external unit 1 or external
unit 2.
❒ When this product's blue lead is connected to
the vehicle's auto-aerial relay control terminal,
the vehicle's aerial extends when ACC (igni-
tion) is turned on and the front panel is
attached. To retract the antenna, detach the
front panel.
The vehicle's aerial extends regardless of
whether this product's source is turned on or
off.

Loading a Disc

• Insert a disc into the disc loading slot.
Format reading will start.
For DVD-Video, CD
❒ "DISC AUTO" is off in the default setting.
➲ "DISC AUTO" ➞ Operation Manual
❒ When a disc is already loaded in this prod-
uct, select the source by pressing the SRC
button.
❒ To eject a disc, press the EJECT button.
For the DVD Map Disc
❒ Inserting the disc starts DVD navigation
mode.
❒ Removing the disc sets Memory navi
mode.
❒ You can use the NAVI/AV button to switch
between navigation map displays and audio
operation displays.
❒ The DVD drive plays one standard 12-cm or 8-
cm (single) disc at a time. Do not use an
adapter when playing 8-cm discs.
13