Makita BTD133 Instruction Manual page 4

ENGLISH
(Original instructions)
1 Button
2 Red part
3 Battery cartridge
4 Switch trigger
5 Lamp
6 Light button
7 Reversing switch lever
8 Changed in three steps
SPECIFICATIONS
Capacities
–1
No load speed (min )
Impacts per minute
Overall length
Net weight (with battery cartridge)
Rated voltage
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.
4
Explanation of general view
9 Hard
10 Medium
11 Soft
12 Hammering force button
13 LED indicator
14 Bit
15 Sleeve
16 Hook
Model
Machine screw
Standard bolt
High tensile bolt
Hammer mode (Hard)
Hammer mode (Medium)
Hammer mode (Soft)
Hammer mode (Hard)
Hammer mode (Medium)
Hammer mode (Soft)
BTD133
4 mm – 8 mm
5 mm – 14 mm
5 mm – 12 mm
0 – 2,400
0 – 1,800
0 – 1,100
0 – 3,200
0 – 2,600
0 – 1,100
With one-touch bit holder 139 mm
Without one-touch bit holder 140 mm
1.4 kg
D.C. 14.4 V
CORDLESS IMPACT DRIVER
SAFETY WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
ENE033-1 tacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator
an electric shock.
2. Always be sure you have a firm footing.
GEA010-1 Be sure no one is below when using the tool in
high locations.
3. Hold the tool firmly.
4. Wear ear protectors.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product.
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
17 Screw
18 Groove
19 Standard bolt
20 Fastening torque
21 Proper fastening torque
22 Fastening time
23 High tensile bolt
BTD145
4 mm – 8 mm
5 mm – 14 mm
5 mm – 12 mm
0 – 2,600
0 – 2,000
0 – 1,300
0 – 3,400
0 – 2,800
0 – 1,300
1.3 kg
D.C. 18 V
GEB054-1