NordicTrack Gx 2.7 Bike Manual page 10

6. Tip: Avoid pinching the Main Wire Harness
(25). Orient the Upright (27) as shown, and hold
it on the Frame (50).
Attach the Upright (27) with four M8 x 20mm
Screws (29).
7. Locate the lower end of the wire tie in the Upright
(27). Tie the wire tie to the Main Wire Harness
(25). Then, pull the upper end of the wire tie until
the Main Wire Harness is routed through the
Upright.
Tip: To prevent the Main Wire Harness (25)
from falling into the Upright (27), secure the
Main Wire Harness with the wire tie.
6
Avoid pinching the
Main Wire Harness (25)
7
10
27
29
25
50
Wire
Tie
27
Wire
Tie
25