If You Forget Your Password; Area Code; Others; Pbc - Pioneer DVH-3900MP Owner's Manual

SET UP menu
To change the password:
1 Select Password on the Lock menu and then
press d.
2 Press ENT when the Change option is high-
lighted.
3 Enter a current password using the numbered
buttons then press ENT.
4 Enter a new password using the numbered
buttons then press ENT.
5 Enter the password again to verify.

If you forget your password

If you forget your password you can clear it
using the following steps.
1 Press D.SETUP.
The Setup menu appears.
# You can perform the same operation by press-
ing and holding DISC MENU/SET UP on the re-
mote control.
Input the 6-digit number "210499" and
2
the password is cleared.
3 Enter a new password. Refer to To
make a new password: on the previous
page.

Area Code

Enter the code of the area whose standards
were used to rate the DVD video disc, accord-
ing to the area code. Refer to Area code list on
page 55.
1 Select Area Code on the Lock menu
then press d.
2 Follow the step 2 as shown on Rating
on the previous page.
3 Select the first character using a/b.
4 Press ENT and select the second charac-
ter using a/b.
5 Press ENT to confirm your country code
selection.

Others

PBC

Set Playback Control (PBC) to On or Off.
! On: Video CDs with PBC are played accord-
ing to the PBC.
! Off: Video CDs with PBC are played in the
same way as Audio CDs.
Note
The PBC function is only available for playing the
Video CD 2.0.
Section
09
29
En