Advertisement
U S E R ' S G U I D E
PRODUCT DESCRIPTION
The H2O Portable Steam Cleaner has a high degree of cleaning and degreasing power on a wide variety of
surfaces. The steam emitted from the tip can assist in the removal of dirt, grease and grime. Since the H2O
Portable Steam Cleaner uses only ordinary tap water without additives, it is environmentally friendly.
Some of the surfaces which can be safely cleaned by the H2O Portable Steam Cleaner include upholstery, sealed
grout, bathroom and kitchen tile, stove tops, removable exhaust filters over stoves, windows and mirrors.
INSTRUCTIONS FOR USE
1. Press down and slowly unscrew the Safety Lid (6). Take 175ml (6oz)
clean water with the Measuring Cup (1) (about one and a half cup of
water), and add the water into the tank. (Max. capacity of the tank is
300ml (10oz). Do not overfill the tank, some space must be left in the
tank). (FIGURE A).
2. Rescrew the Safety Lid (6) securely into place, press it down and turn
clockwise until it is securely closed.
3. Plug the appliance into an outlet. The Power Indicator (9) will light.
4. Wait approximatelly 4-5 minutes until the H2O Portable Steam Cleaner
reaches operating temperature. When the H2O Portable Steam Cleaner
is ready to emit steam, the Power Indicator (9) will turn off. Press the
Steam Button (7) and the H2O Portable Steam Cleaner will emit a stream of steam.
5. When water needs to be refilled, press the Steam Button (7) to release steam completely. Disconnect the
plug from the outlet. WAIT AT LEAST TEN MINUTES for the unit to cool down before unscrewing the Safety
Lid (6). Then repeat steps 1 to 4 if needed.
6. How to install Straight Nozzle - slide the Straight Nozzle ( 4 ) onto the Small Pivotal Nozzle ( 5 ) and align the
straight line mark on the Straight Nozzle ( 4 ) with the single line mark on the steamer body. Rotate the
Straight Nozzle ( 4 ) in clockwise direction, and align the straight line mark on the Straight Nozzle ( 4 ) with
the double line mark on the steamer body.
7. How to install Round Brush - slide the Round Brush ( 3 ) onto the Small Pivotal Nozzle ( 5 ), until it's securely
attached.
CAUTION: Never direct steam towards people, animals or plants, or other objects unable to withstand high
temperature. Avoid skin contact with the steam jet. The high temperature may cause serious physical injury
including burns. The steam must not be directed towards equipment containing electrical components, such
as the interior of ovens.
FIGURE A.
3
U S E R ' S G U I D E
Do not use the steamer on cold glass. It may cause the glass to break or crack.
This appliance must be grounded. Use only the proper type outlet when plugging in the appliance, do not
attempt to override the ground wire feature.
PARTS:
1) MEASURING CUP
2) FUNNEL
3) ROUND BRUSH
4) STRAIGHT NOZZLE
5) SMALL PIVOTAL NOZZLE
6) SAFETY LID
7) STEAM BUTTON
8) BODY
1
9) POWER INDICATOR
10) POWER CORD
CLEANING AND MAINTENANCE
After the H2O Portable Steam Cleaner is Used
1. After the H2O Portable Steam Cleaner is used, unplug the Power Cord and disconnect the power supply.
2. Press the Steam Button down to release the pressure until no steam is ejected.
3. Slowly unscrew the Safety Lid but do not remove it, residual steam will be discharged slowly until no
steam comes out. Place the H2O Portable Steam Cleaner in a cool place to cool it down for about five
minutes. Completely remove the Safety Lid.
4. Empty the residual water in the tank and clean the external surface with a piece of dry cloth.
5. Re-install the Safety Lid onto the steamer Body and tighten it in position.
DO NOT use vinegar or other descaling substance to remove deposits in the H2O Portable Steam Cleaner unit.
DO NOT immerse the appliance in water.
6
7
5
3
4
8
2
9
4
10
Advertisement
