Table of Contents
Advertisement
8 Other features
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
When the unit is turned on, press SLEEP/
•
TIMER repeatedly to select a set period of
time (in minutes).
• [SLEEP OFF]
• [SLEEP -- 120]
• [SLEEP -- 90]
• [SLEEP -- 60]
• [SLEEP -- 45]
• [SLEEP -- 30]
• [SLEEP -- 15]
» When sleep timer is activated,
displayed.
To deactivate sleep timer
•
Press SLEEP/TIMER repeatedly until
[SLEEP OFF] (sleep off) is displayed.
» When sleep timer is deactivated,
disappears.
Set the alarm timer
This unit can be used as an alarm clock. The
DISC, USB,TUNER, iPod_iPhone or PLAYLIST is
activated to play at a preset time.
1
Press
to switch the unit to standby
mode.
2
Make sure that you have set the clock
correctly.
3
Press and hold SLEEP/TIMER.
» A prompt to select the source is
displayed.
16
EN
4
Press SRC repeatedly to select a source:
DISC, USB, TUNER, iPod_iPhone or
PLAYLIST.
5
Press SLEEP/TIMER to confirm.
» The hour digits begin to blink.
6
Press PRESET/ALBUM
hour.
7
Press SLEEP/TIMER to confirm.
» The minute digits begin to blink.
8
Press PRESET/ALBUM
minute.
9
Press SLEEP/TIMER to confirm.
» The [VOL] (volume) begins to blink.
10
Press PRESET/ALBUM
the volume, then press SLEEP/TIMER to
confirm.
» The timer is set and activated.
Tip
is
•
For source selection, you can also press VOL -/+,
PRESET/ALBUM
VOL -/+ on the main unit.
•
For hour/minute/volume adjustment, you can also press
VOL -/+ on the remote control or the main unit.
Activate and deactivate the alarm
timer
1
Press
mode.
2
Press SLEEP/TIMER repeatedly to activate
or deactivate the timer.
» If the timer is activated, the display
» If the timer is deactivated,
/
on the remote control, or
to switch the unit to standby
shows
.
disappears on the display.
/
to set the
/
to set the
/
to adjust
Advertisement
Table of Contents
