Philips PFL3xx8H/T User Manual page 14


Sit at a distance that is at least three
times the width (w) of the TV screen.
Do not sit more than 6 m away.
Start 3D
Automatically enable 3D
The TV detects when 3D is available and
prompts you to put on your 3D glasses to
start watching. To set the TV response when
a 3D signal is detected:
1. Press .
2. Select [Setup] > [TV settings] > [3D] >
[Switch to 3D].
3. Select a setting, then press OK.

[Automatic]: TV switches to 3D
automatically.

[Notification only]: TV displays
notification first.

[Never]: No notification.
Select a source with 3D
For 3D discs:
1. Play the disc on a 3D Blu-ray disc player
that is connected to the TV HDMI
connector.
2. Press SOURCE, then select the 3D
Blu-ray disc player.
For 3D TV programmes:
1. Select [Watch TV], then switch to a TV
channel that broadcasts 3D content.
Note:

To switch back to 2D, press OPTIONS.
Select [Picture and sound] > [3D
settings] > [2D].

If you switch to another channel or a
connected device, the TV switches to
2D.
Select 3D input format
The TV detects when 3D is available and
prompts you to put on your 3D glasses to
start watching. If the TV cannot detect the
3D signal due to a missing 3D signal tag, it
displays images that overlap.
EN 14
To switch the overlapping images to 3D,
change the 3D format.
1. Press OPTIONS.
2. Select [Picture and sound] > [3D
settings].
3. Select a setting, then press OK.

[3D - Side by side]: Select if the TV
displays pictures that overlap vertically.

[3D - Top / bottom]: Select if the TV
displays pictures that overlap
horizontally.

[3D - top/bottom inverted] or [3D -
side by side inverted]: Select if the TV
displays distorted images, such as the
background appearing nearer to you.
Convert 2D to 3D
You can convert any 2D programme to
watch it in 3D.
1. Press OPTIONS.
2. Select [Picture and sound] > [3D
settings] > [2D to 3D conversion].
To adjust the 3D depth:
1. Press OPTIONS.
2. Select [Picture and sound] > [3D effect].
3. Select an option, then press OK.
To switch off 2D to 3D conversion:
1. Press OPTIONS.
2. Select [Picture and sound] > [3D
settings] > [2D], then press OK.
Note: If you switch to another activity, the
conversion stops.