Before You - GE 164D3333P171 Owner's Manual

Before you call for service...
Troubleshooting Tips
Problem
Excessive smoking
"LOCK DOOR" flashes
in the display
"F—and a number"
flash in the display
Power outage
56
Possible Causes
Excessive soil.
The self-clean cycle has
been selected but the
door is not locked.
The latch handle was
moved to the right but
a program other than
self-clean was selected.
You have a function
error code.
Power outage or surge.
What To Do
Press the CLEAR/OFF pad.
•
Open the windows to rid
the room of smoke. Wait
until the LOCKED DOOR
light goes off. Wipe up
the excess soil and reset
the clean cycle.
Move the door latch
•
handle all the way to
the right.
Press the CLEAR/OFF pad
•
and begin again.
If a function error code
•
appears during the self-
cleaning cycle, check the
oven door latch. The latch
may have been moved, even
if only slightly, from the
locked position. Make sure
the latch is moved to the
right as far as it will go.
Press the CLEAR/OFF pad.
Allow the oven to cool for
one hour. Put the oven
back into operation.
Disconnect all power to
•
the range for 5 minutes
and then reconnect power.
If the function error code
repeats, call for service.
Reset the clock. If the
•
oven was in use, you must
reset it by pressing the
CLEAR/OFF pad, setting the
clock and resetting any
cooking function.