GE 164D3333P171 Owner's Manual page 38

Care and cleaning of the range.
38
Cooktop Surface Light
When changing a cooktop light, do not touch the metal at the ends
of the light.
The cooktop light is easily replaced with a fluorescent
tube of the same wattage. Before changing the light,
pull the plug to the range or disconnect the power at the
main fuse or circuit breaker panel.
To remove:
Lift the light cover by pulling the bottom edge
1
toward you and then up.
Place fingers on top near each end of the light.
2
Roll the top of the light gently toward the front of
3
the range and gently pull the light from the socket,
making sure it does not hit the light cover.
To replace:
Place fingers on the top near each end of the light.
1
Press the light into the slots until it snaps into place.
2
Move light cover down and snap into place.
3