PC settings – picture position, clock phase,
Picture position
Connect the PC (as shown in the 'Connecting a PC'
section) and ensure that a picture is showing on the
television screen. The picture position may now be
adjusted to suit personal preference.
B
Press
to select PC, then select PC Setting
1
from the SET UP menu.
SET UP
Language
Country
AV connection
PC Setting
Back
MENU
EXIT
f
Press OK. Press
2
and
z
x
then
or
to adjust the settings.
PC Settings
Horizontal position
Horizontal width
Vertical position
Vertical height
Clock phase
Sampling clock
Back
MENU
EXIT
Clock phase
The Clock phase matches the PC signal with the LCD
display. Adjusting this can clear horizontal stripes and
picture blur.
In the SET UP menu press
1
highlighted.
Press OK to select, then
2
phase.
z
x
Use
or
to adjust until the picture clears.
3
sampling clock, reset
English
UK
OK
OK
Watch TV
e
to select an option,
1/2
0
– 5
0
– 5
0
0
Watch TV
e
until PC Setting is
e
to highlight Clock
Adjusting the Sampling clock alters the number of pulses
per scan, this will clear vertical lines on the screen.
In the SET UP menu press
1
highlighted.
Press OK to select, then
2
clock.
Horizontal position
Horizontal width
Vertical position
Vertical height
Clock phase
Sampling clock
Back
MENU
z
3
Use
or
To return to the original factory settings.
In the SET UP menu press
1
highlighted.
Press OK to select, then
2
Press OK.
3
NOTE: When a PC is connected using HDMI none of
these functions will be available.
32
Sampling clock
e
until PC Setting is
e
to highlight Sampling
PC Settings
– 5
– 5
Watch TV
EXIT
x
to adjust until the picture clears.
Reset
e
until PC Setting is
e
to highlight Reset.
1/2
0
0
0
0