Table of Contents
Advertisement
Setting
Channel Info Bar Time Out
Go to Main menu > Setting > User preferences >CH
1.
Info Bar Time Out.
2. Press ▲▼ key to select the CH Info Bar Time Out
option, and press OK key to enter submenu.
3. Press ▲▼ key to select the timeout (4 timeout modes
are available: 1 second, 3 second, 5 second, 10
second), and press OK key to confirm.
4. Press EXIT key to exit all menu or press MENU
key to return to the previous menu.
Volume Bar Time Out
1. Go to Main menu > Setting > User
preferences >Volume Bar Time Out.
2. Press ▲▼ key to select the Volume Bar Time Out
option, and press OK key to enter submenu.
3. Press ▲▼ key to select the timeout (
4 timeout modes are available: 1 second,
3 second, 5.second, 10 second), and press OK key
to confirm.
4. Press EXIT key to exit all menu or press MENU key to
return to the previous menu.
Standby Mode
1. Go to Main menu > Setting > User
preferences >Standby Mode.
2. Press ▲▼ key to select the Standby Mode option, and
press OK key to enter submenu.
3. Press ▲▼ key to select the passive or active option.
4. Press EXIT key to exit all menu or press MENU key to
return to the previous menu.
Remarks: To pass the antenna signal through the unit while in standby select Active Mode
28
Advertisement
Table of Contents
