Setting
Installation
Auto Scan
1. Go to Main menu >Setting >Installation.
2. Press RED key to auto scan all the channels.
3. Press EXIT key to stop during the auto scan.
Note: An Auto Scan can be performed by pressing the SCAN button on the remote control
Manual Scan
1. Go to Main menu > Setting >Installation.
2. Press ▲▼ to select the channels you want to scan. Press
key to page up/down.
3. Press OK key to select the channel, press again to cancel your selection. If the channel
is selected, an icon "√" will appear.
4. Repeat step2, 3 until all channels you want to search are selected.
5. Press BLUE key to start scanning the selected channels.
6. Press EXIT key to stop during the scan.
23