Automating Effect Parameters; Adding An Effect Automation Envelope; Adding A Volume Or Panning Envelope - Sony Pro 10 User Manual

Automating effect parameters

When you add an effect that supports automation to the Plug-In Chainer, a list of the effect's automatable parameters is displayed on
the right side of the window. You can use these controls to add, show/hide, and enable/bypass automation envelopes.
Plug-in parameters can be edited using the automation envelope in the data window.
Note:
Choosing a new effect chain preset will clear the current effect automation settings.

Adding an effect automation envelope

1.
In the Plug-In Chainer, select the button (
displayed, and a list of the effect's automatable parameters is displayed on the right side of the Plug-In Chainer.
Tip:
The Parameter Chooser is displayed on the right side of the Plug-In Chainer window when you add a plug-in that supports
automation. Click the Show Parameter Chooser button (
2.
Select the Automate check box for each parameter you want to control with an envelope. An envelope is added to the data
window for each selected check box.

Adding a volume or panning envelope

Panning envelopes will have no effect on mono source data. Convert mono sound data to stereo before adding a panning envelope.
1.
Click within a data window to give it focus.
2.
Press V to add a volume envelope, or press P to add a panning envelope.
An envelope is added to the data window and the Sound Forge Volume or Sound Forge Pan plug-in is added to the Plug-In Chainer.
If the Plug-In Chainer is not visible, it will be opened.
Note:
If a data window already has a volume envelope, pressing P or V will hide the envelope.
3.
Adjust volume or panning with the envelope in the data window.
) for an effect that includes automatable parameters. The plug-in's controls are
) or press Ctrl+H to show or hide the chooser.
205
WORKING WITH EFFECTS |