Creating A Plug-In Chain; Adding A Plug-In To A Chain - Sony Pro 10 User Manual

Creating a plug-in chain

1.
Select the data you want to process. If no data is selected, the effect chain is applied to the entire file.
2.
From the View menu, choose Plug-In Chainer or click the Open Plug-In Chainer button (
Chainer window is displayed.
3.
To use an existing chain preset, choose the chain from the Chain drop-down list. For more information, see
page 200. Otherwise, add the desired plug-ins to a new custom chain. For more information, see
197.
4.
Configure the parameters of each plug-in. For help on the different plug-in controls, click the Help for Effect button (
5.
Click the Preview button (
preview different sections before applying the effect chain. You can also click the Bypass button (
effect. For more information, see
Tip:
You can also click the Play Plug-in Chainer button (
button ( ) to bypass the effects.
6.
If the effect changes the duration of a sound (for example, Reverb or Simple Delay), choose how the audio tail created by the effect
should be processed. For more information, see
Note:
The Insert Tail Data and Mix Tail Data commands may not function when using third-party reverb plug-ins.You can use the
Insert Silence command to make room for the tails or apply the reverb in a new data window that has room for the tails and then mix
the processed audio back into your source file.
7.
Click the Process Selection button (

Adding a plug-in to a chain

You can add plug-ins to a chain in the Plug-In Chainer in several ways.
1.
Click the Add Plug-Ins to chain button (
displayed, listing all available DirectX plug-ins installed on your system.
2.
Select the desired plug-ins.
3.
Click Add. The selected plug-ins are added to the chain and can be configured and arranged as needed.
Tip:
You can also double-click a plug-in to add it to the chain.
) to test the effect chain. If needed, you can select different parts of the audio in the data window to
Bypassing effects on page 199.
Selecting the processing mode for audio tail data
) (or press Ctrl+Shift+P) to apply the effect chain.
) on the Plug-In Chainer window (or press Ctrl+E). The Plug-In Chooser window is
) on the data window to preview the effects chain. Use the Play Normal
) on the data window. The Plug-In
Saving plug-in chains
Adding a plug-in to a chain
).
) to temporarily bypass the
on page 199.
WORKING WITH EFFECTS
on
on page
197
|