Display Board (Pc22) Dip Switch Settings - Miller Electric SuitCase X-TREME 8VS WCC Owner's Manual

4-13. Display Board (PC22) DIP Switch Settings

Factory DIP
switch settings
when displaying
inches per
minute
Factory DIP
switch settings
when displaying
meters per
minute
2
1
Accessing DIP Switch
1 Lens
DIP switch is located under the
lens next to the displays.
2 Lens Screws
Remove three screws.
Loosen upper right hand screw to
rotate lens enough to access DIP
switch.
Replace three screws removed
earlier.
Tighten upper right hand screw.
.
The two upper screws must
engage the backing plate to
properly secure the front pan-
el.
Ref. 805 170-A
OM-237 323 Page 19