Use More Of Your Audio System; Set The Alarm Timer; Set The Sleep Timer; Connect Other Devices - Philips MCM772 User Manual

8 Use more of
your audio
system

Set the alarm timer

1
Ensure that you have set the clock
correctly.
2
In standby mode, press and hold TIMER .
The hour digits are displayed and begin
»
to blink.
3
Press + VOL - to set the hour.
The minute digits are displayed and
»
begin to blink.
4
Press + VOL - to set the minute.
5
Press TIMER to confi rm.
6
To activate the wake-up timer, press + VOL
- to select [ON] (on).
A clock icon appears on the display.
»
The audio system turns on
»
automatically at the set time and
switches to the last selected source.
• To deactivate the alarm timer, select [OFF]
(off) at step 6.

Set the sleep timer

1
When the audio system is turned on, press
SLEEP repeatedly to select a set period of
time (in minutes).
The audio system turns off
»
automaticaly after the set period of
time.

Connect other devices

Caution
•
Before connecting any other device to the audio
system, ensure that you have disconnected the power
adaptor of the audio system.
Note
•
If the device only provides a mono jack, connect it to
the left jack on the audio system. Alternatively, you can
also use a "single to double" cinch cable.

Listen through other devices

You can listen to this audio system through
other devices.
1
Connect the audio output sockets to the
AUDIO OUT (L/R) sockets on this audio
system.

Listen to other devices

You can listen to other devices through this
audio system.
1
Connect the audio output sockets to
the AUX IN (L/R) sockets on this audio
system.
EN 21