Scan All Tracks - Philips MCM772 User Manual

2
Press / to select a track number
to program, then press PROGRAM to
confi rm.
• To select a track in an MP3 disc or
USB device, fi rst press ALBUM +/- to
select the album where the track is
located.
[P-X] is displayed, where "X" is the
•
next position in the program.
3
Repeat steps 2 to 3 to select and store all
tracks to program.
4
Press PROGRAM to complete.
[PROG] (program) is displayed.
»
5
Press to play the programmed tracks.
• To erase the program, press
PROGRAM .

Scan all tracks

1
Press INTRO to play the fi rst 10 seconds
of each track one by one.
• To stop scan, press INTRO again.
EN 17