8 Use more of
your Micro
System
Set the sleep timer
This unit can switch to standby automatically
after a preset period of time.
1
When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period
of time (in minutes).
»
When sleep timer is activated, the
display shows
To deactivate sleep timer
1
Press SLEEP/TIMER repeatedly until "SLP
OFF" is displayed.
»
When sleep timer is deactivated,
disappears on the display.
Set the alarm timer
This unit can be used as an alarm clock. The
DISC, TUNER or USB is activated to play at a
preset time.
1
Ensure that you have set the clock
correctly.
2
In standby mode, press and hold SLEEP/
TIMER for more than 2 seconds.
3
Press CD , TUNER or USB/MP3 LINK to
select a source.
4
Press SLEEP/TIMER to conÀ rm.
»
The hour digits are displayed and begin
to blink.
5
Press VOL +/- to set the hour.
6
Press SLEEP/TIMER to conÀ rm.
»
The minute digits are displayed and
begin to blink.
7
Press VOL +/- to set the minute.
16
EN
.
8
Press SLEEP/TIMER to conÀ rm.
»
The timer is set and activated.
Activate and deactivate the alarm
timer
1
In standby mode, press SLEEP/TIMER
repeatedly to activate or deactivate the
timer.
»
If the timer is activated, the display
shows
.
»
If the timer is deactivated,
disappears on the display.
Note
•
If disc/USB device source is selected and the track
cannot be played, tuner is activated automatically.
Listen through headphone
1
Plug a headphone into the
the unit.
socket on