Download Print this page

GE JTP90BM Dimensions And Installation Information

30" built-in double microwave/thermal wall oven.
Hide thumbs
   

Advertisement

20''
CABINET
WIDTH
30''
JTP90BM/CM/WM
CUTOUT DEPTH
CUTOUT
23-1/2'' MIN.
WIDTH
GE
30" Built-In Double Microwave/Thermal Wall Oven
®
28-1/2'' MIN.
28-5/8'' MAX.
JUNCTION BOX
Dimensions and Installation Information (in inches)
LOCATION
A
C
KW Rating
CONDUIT
(72'' LONG)
240V
6.4
CUTOUT
HEIGHT
208V
5.6
42-3/16'' MIN.
42-1/4'' MAX.
Breaker Size
240V
30 Amps
208V
30 Amps
Note: Cabinets installed adjacent to wall
ovens must have an adhesion spec of at
B
least a 194°F temperature rating.
Minimum
cutout location
Installation Information: Before installing,
21-5/8''
from the floor
consult installation instructions packed with
product for current dimensional data.
Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45°
and 90° walls should be placed to avoid
interference with the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle. They
must be hard wired in accordance with
installation instructions.
For answers to your Monogram,
®
GE
appliance questions, visit our website at
®
ge.com or call GE Answer Center
800.626.2000.
28''
Suitable
bracing
to support
over centerline
runners
(must support 275 lbs.)
Cabinet
A – Overlap of oven over side of edges of cutout
B – Overlap of oven at top and bottom of cutout
C – Overall of oven at top of cutout
Oven
D – Overall depth*
E – Overall height with trim
Overall height without trim
E – Overall width
*Depth including door handle is approximately 26-6/10" min. to
26-9/10" max.
GE Profile
or
service,
®
C L
2 x 4 or
equivalent
runners
21-5/8"
of cabinet
30"
11/16"
1"
1/2"
21" Minimum
23-1/2"
Door Allowance
44"
43-1/2"
29-3/4"
THE OPENING BETWEEN THE INSIDE WALLS MUST BE AT LEAST 28-1/2'' WIDE.
A
F
E
DOOR MUST BE
REMOVED BEFORE
INSTALLATION
D
21''
MOST 30'' WALL CABINETS CAN BE USED WITH THIS UNIT.
Specification Revised 9/07
20''
CABINET
WIDTH
30''
CUTOUT DEPTH
CUTOUT
23-1/2'' MIN.
WIDTH
28-1/2'' MIN.
28-5/8'' MAX.
JUNCTION BOX
LOCATION
A
C
CONDUIT
(72'' LONG)
CUTOUT
HEIGHT
42-3/16'' MIN.
28''
42-1/4'' MAX.
B
Minimum
cutout location
21-5/8''
from the floor
Listed by
Underwriters
Laboratories
320140
to
Ca
Ov
*D
26

Advertisement

   Also See for GE JTP90BM

   Related Manuals for GE JTP90BM

   Summary of Contents for GE JTP90BM

  • Page 1

    For answers to your Monogram, ® GE Profile ™ appliance questions, visit our website at ® ge.com or call GE Answer Center service, ® 800.626.2000. 2 x 4 or equivalent runners Suitable bracing 21-5/8"...

  • Page 2

    System - Delivers even heat distribution and maximum oven control ™ • 1.6 Cu. Ft. Capacity (Upper Oven Only) - Provides a large interior to accommodate a variety of cookware, dinnerware and food containers • Sensor Cooking Control (Upper Oven Only) - Provides a built-in sensor in the upper...

This manual also for:

Jtp90wm, Jtp90cm, Jtp90bmbb, Jtp90cmcc, Jtp90wmww

Comments to this Manuals

Symbols: 0
Latest comments: