GE JT912, JT952 Owner's Manual page 27

Problem
Oven temperature too
hot or too cold
Oven will not work
Oven will not self-clean
"Crackling" or
"popping" sound
Excessive smoking
during clean cycle
Oven door will
not open after a
clean cycle
Oven not clean after a
clean cycle
"LOCK DOOR" flashes
in the display
LOCKED DOOR light
is on when you want
to cook
Possible Causes
Oven thermostat
needs adjustment.
A fuse in your home may
be blown or the circuit
breaker tripped.
Oven controls improperly set.
The oven temperature
is too high to set a
self-clean operation.
Oven controls improperly set.
The probe is plugged into
the outlet in the oven.
This is the sound of the
metal heating and cooling
during both the cooking and
cleaning functions.
Excessive soil.
Oven too hot.
Oven controls not properly set.
Oven was heavily soiled.
The self-clean cycle has
been selected but the
door is not closed.
The oven door is locked
because the temperature
inside the oven has not
dropped below the
locking temperature.
What To Do
• See the Adjust the oven thermostat—Do it yourself!
section.
• Replace the fuse or reset the circuit breaker.
• See the Using the oven section.
• Allow the oven to cool and reset the controls.
• See the Using the self-cleaning oven section.
• Remove the probe from the oven.
• This is normal.
• Press the CLEAR/OFF pad. Open the windows to rid
the room of smoke. Wait until the LOCKED light goes
off. Wipe up the excess soil and reset the clean cycle.
• Allow the oven to cool below locking temperature.
• See the Using the self-cleaning oven section.
• Clean up heavy spillovers before starting the clean
cycle. Heavily soiled ovens may need to self-clean
again or for a longer period of time.
• Close the oven door.
• Press the CLEAR/OFF pad. Allow the oven to cool.
www.GEAppliances.com
27