Audio Connections; Speaker/Amplifier Connection - Sharp Aquos LC-60LE835X Operation Manual

Connecting external devices

Audio connections

Speaker/amplifier connection

Connect an amplifier with external speakers as shown
below.
E
Connecting an amplifier with digital/
analogue audio inputs

Optical audio cable (for digital audio) (commercially
available)

Stereo conversion cable (for analogue audio)
(commercially available)
* This terminal is also used for headphones. Reduce the
volume before using headphones. Overwhelming sound may
damage your hearing.
Notice
When connecting an optical audio cable to the DIGITAL AUDIO OUTPUT terminal, check the direction carefully, and
insert it straight in while aligning the bottom side. Forcing it could cause damage to the terminal.
*1
(*1)
Turn the flat surface aligning
the jack shape and insert it
straightly.
28
*2
(*2)
Do not insert upside-down.
NOTE
• Optical digital audio will be output in 2-ch stereo when it is
from the external equipment connected to the TV using an
HDMI cable.
• If the image is not in sync with the audio, check the settings
of the connected surround system.
E
After connecting
Digital audio output setting
After connecting an amplifier with digital audio input and
external speakers as shown, you should set an audio
output format compatible with the programme you are
watching or the device connected.
Go to "HOME" > "TV Menu" > "Setup" > "Option" >
"Terminal setting" > "Digital audio output" > select
"PCM" or "Dolby Digital".
NOTE
• When set to "Dolby Digital", Dolby Digital is output when the
Dolby Digital or Dolby Digital Plus audio formats are received.
When set to "PCM", PCM is output no matter what audio
formats are received.
• When set to "Dolby Digital", HE-AAC audio formats can be
output as Dolby Digital.
Do not twist when inserting.
(Drawing from a side view)
Do not insert sideways.