Battery Charging - Sharp STX-2 User Manual

BATTERY CHARGING

POWER CONNECTION
1.
Plug the USB cable into the AC Charger port.
2.
Plug the AC Charger into a standard outlet.
3.
To access the charging port located on the left side of your SHARP FX,
as seen on page 11, open the flap and plug the other end of the AC
Charger into the charging port. The battery must be installed for the
phone to work properly.
4.
The USB icon on the USB cable should always
be face-up on the same side as the display
screen when it is inserted into the SHARP FX
phone. See the diagram to the right for proper
positioning and insertion of the AC Charger
adapter into the phone. You should never
force the AC Charger adapter into the phone.
• when you charge the battery with the phone powered off, you will see a
Note
charging status screen. You cannot operate the phone until it is powered on.
• The battery is not charged at the time of purchase.
• Fully charge the battery before use.
• It is more efficient to charge the battery with the handset powered off.
• The battery must be connected to the phone in order to charge it.
• Battery operating time gradually decreases over time.
• If the battery fails to perform normally, you may need to replace the battery.
Please refer to the Manufacturer's warranty on page 177 for further
information.
BATTERY USAGE
17 17