Chapter 1. Introduction
Thank you for choosing the TD-8610 External ADSL2+ Modem.
1.1 Product Overview
With the excellent design of circuit and high quality production, we guarantee ADSL2+ MODEM
a high performance, very good stability and easy to use.
TD-8610 is a complete plug-and-play solution. With standard Ethernet interface, it can be
directly connected to any 10M/100M Ethernet devices, supporting Auto-MDIX.
TD-8610 not only uses html (web mode through Ethernet port) to configure the MODEM but
also use external utility software too. You can download it from our website
(http://www.tp-link.com).
1.2 Main features
High speed and asymmetry data transmit mode, adapt to wide-band internet access
Point to point connection, provide safe and exclusive bandwidth
Support All ADSL industrial standards
Advanced DMT modulation and demodulation
Firmware upgradeable
Compatible with all mainstream DSLAM (CO)
Real-time Configuration and device monitoring
Quick response semi-conductive surge protect circuit, provides reliable ESD and
surge-protect function
Supports ADSL dual latency (fast path and interleaved path)
1.3 Supporting protocols
- ANSI T1.413
- G.992.1 (G.dmt) - Annex A
- G.992.2 (G.lite) - Annex A
- G.992.3 (ADSL2) - Annex A compliant
- G.992.5 (ADSL2+) - Annex A compliant
- I.432 ATM physical layer compliant
- Supports RFC2516 (PPPoE) *
- Supports RFC1483 (EoA) (Bridged)
Note:
"*"Need third-party software.
TD-8610
2
ADSL2+ MODEM