Switch Interoperability; Product Highlights - HP QMH2672 Specification

QuickSpecs

Product Highlights

BladeSystem Compatibility
Supported HP ProLiant
Server Blades
NOTE: The HP QMH2672 16Gb FC HBA for HP BladeSystem c-Class must be deployed with the BladeSystem c-Class infrastructure and
will only work with the BL c-Class Server Enclosures.
NOTE: The HP BladeSystem c7000 Platinum Enclosure is required to permit 16Gb/s speed. Other HP BladeSystem c7000 Enclosures
and HP BladeSystem c3000 Enclosures will have a maximum speed of 8Gb/s.
NOTE: The HP QMH2672 16Gb FC HBA for HP BladeSystem c-Class is not compatible with 4Gb BladeSystem c-Class Fibre Channel
interconnects.
NOTE: The HP QMH2672 16Gb FC HBA for HP BladeSystem c-Class is not compatible with HP ProLiant G7 and earlier server blades.
NOTE: This is a Type A mezzanine card, and can be configured in either Type A or Type B slots on HP ProLiant Gen8 Server Blades.

Switch interoperability

HP Storage and Third
Party Switches
BL660c Gen8
BL465c Gen8
BL460c Gen8
16/8/4 Gb Switches and Directors
Compatible with external Fibre Channel switches including HP and third party vendors including
Cisco and Brocade
Compatible with 8Gb and 16Gb HP BladeSystem c-Class Fibre Channel switches and Virtual Connect
Modules
For details on supported HP Fibre Channel SAN Switches, please consult the SAN Design Reference Guide at
the following WEB address:
DA - 14622 North America — Version 1 — September 10, 2013
HP QMH2672 16Gb FC HBA for BladeSystem c-Class
http://www.hp.com/go/san-documentation
Page 3