AVM FRITZ!WLAN USB Stick N Installation, Configuration And Operation page 45

Allowing Network Access
Two or more computers are networked via
FRITZ!WLAN USB Stick N, but you cannot access files and
connected devices on the remote site.
Possible Cause
The desired resources like folders, drives, printers or
Internet connections are not configured for network sha-
ring.
Remedy
Make sure that those resources are configured for net-
work sharing. Further information is provided in the
Online Help of your operating system.
Checking the Network Data
You computer recognizes the network and the router, but
cannot access the Internet or the network (limited con-
nectivity).
Possible Cause
The WLAN key is wrong or the IP address was not assig-
ned by Windows automatically (note: the process can
take up to three minutes).
Remedy
Check the WLAN key entry. On AVM FRITZ!Box products,
the WLAN key is printed on the underside of the device
and on the installation CD jewel case. If you are using a
WLAN access point from another manufacturer, please
see the documentation of this device. Make sure that the
automatic assignment of IP addresses is enabled in your
operating system. For details, see the section "Checking
the IP Settings" from page 47.
45