AVM FRITZ!WLAN USB Stick N Installation, Configuration And Operation page 43

Checking the Data of the WLAN Connection
Could not register at the WLAN remote site.
Possible Cause
The settings of the WLAN remote site and the entries in
the "WLAN Remote Site" area of the FRITZ!WLAN control
software do not match.
Remedy
Check whether the correct WLAN access point has been
selected from the list of WLAN devices and make sure
that the WLAN key and the name (SSID) of the WLAN re-
mote site have been entered correctly. Pay special atten-
tion to capitalization.
For a WLAN product from the AVM FRITZ!Box family, the
default name always begins with "FRITZ!Box". On AVM
FRITZ!Box products, the WLAN key is printed on the un-
derside of the device and on the installation CD jewel
case.
If you are using a WLAN access point from another manu-
facturer, please see the documentation of this device.
In a direct connection, the preconfigured name of the ad-
hoc network in the FRITZ!WLAN control software is "ad
hoc".
Then connect with the WLAN remote site again.
Changing the Position of the WLAN Devices
No WLAN remote sites are found.
Possible Cause
The WLAN remote site has not been turned on or is loca-
ted too far away from the FRITZ!WLAN USB Stick N.
Remedy
Make sure that the power supply of the WLAN remote site
is secure and that the device is switched on.
Check whether the WLAN remote site is within transmis-
sion range of the FRITZ!WLAN USB Stick N. Reduce the
distance and try to establish the connection again.
43