Vertical/Tower Installation; Electrical Installation - CyberPower OL1000RTXL2U User Manual

VERTICAL/TOWER INSTALLATION

Step 1: Rotate the Multifunction LCD Module
Unscrew the right panel of the UPS. Separate the right panel from the
UPS. Gently lift the LCD module out. Rotate it to the tower orientation.
Reinstall it for a tower configuration.
SAFETY PRECAUTIONS
CAUTION! Installation environment should be in a temperature and humidity controlled indoor area free of conductive contaminants. Do not install this UPS
where excessive moisture or heat is present (Please see specifications for acceptable temperature and humidity range).
CAUTION! Never install a UPS, or associated wiring or equipment, during a lightning storm.
CAUTION! Do not work alone under hazardous conditions.
CAUTION! In case of the risk of electric shock, do not remove the top cover.
CAUTION! The battery can energize hazardous live parts inside even when the AC input power is disconnected.
Copyright © 2012 CyberPower Systems, Inc.
HARDWARE INSTALLATION
Step 2: Attach the base stands
Tighten the screws (M5X12*4pcs) of the base stands (rackmount ears)
onto the bottom of the UPS.
Step 3: Attach dust covers
Insert dust covers into the rackmount ear screw holes that are not being
used.

ELECTRICAL INSTALLATION

After completing the hardware installation of the UPS, you are now ready
to plug in the UPS and connect your equipment.
4