GE POWER LEADER DEH-210 User Manual page 94

88 Features of GE Large Faceplate Wizards
Screen Selected
1 - Total Power
2 - Three-Phase Measurements
3 - Per-Phase Power
4 - Energy
5 - Symmetrical Components
**NOTE: If the Sliding Demand Reset is initiated, or a SWD setup register is
changed, SWD values are "N/A" in the meter until the number of sub-intervals
specified in the #sub intervals setup register have expired. The 3-D faceplate and
Tabular wizard will display 0 for these values during this state.
Description
KW Total
KVAR Total
KVA Total
PF Signed Total
Vln a; Vln b: n/a when Voltage Mode is DELTA
Vln c: n/a when Voltage Mode is DELTA or SINGLE
Vln Avg: n/a when Voltage Mode is DELTA
Vll ab
Vll bc; Vll ca; Vll avg: n/a when Voltage Mode is SINGLE
Ia, Ib, I4, Iavg
Ic: n/a when Voltage Mode is SINGLE
V unbal
I unbal
Line Frequency
KW a; KW b: n/a when Voltage Mode is DELTA
KW c: n/a when Voltage Mode is DELTA or SINGLE
KW Total
KVAR a; KVAR b: n/a when Voltage Mode is DELTA
KVAR c: n/a when Voltage Mode is DELTA or SINGLE
KVAR Total
KVA a; KVA b: n/a when Voltage Mode is DELTA
KVA c: n/a when Voltage Mode is DELTA or SINGLE
KVA Total
PF Signed a; PF Signed b: n/a when Voltage Mode is
DELTA
PF Signed c: n/a when Voltage Mode is DELTA or
SINGLE
KWh Import; KWh Export; KWh Total; KWh Net
KVARh Import; KVARh Export; KVARh Total; KVARh
Net
KVAh Total
KW Total Min; KVAR Total Min; KVA Total Min
KW Total Max; KVAR Total Max; KVA Total Max
I ZeroSeqMag; I PosSeqMag; I NegSeqMag
V ZeroSeqMag; V PosSeqMag; V NegSeqMag
I ZeroSeqPhs; I PosSeqPhs; I NegSeqPhs
V ZeroSeqPhs; V PosSeqPhs; V NegSeqPhs
PMCS Interface Toolkit