At The End Of A Program; Preparing Your Appliance For An Extended Vacation - Miele Classic G 4225 SC Operating Instructions Manual

At the end of a program

The program has ended if the time
display shows a 0.
Now you can open the dishwasher and
unload the dishware.
At the end of a program:
^ Press the K button to turn the
dishwasher off.
The dishwasher will continue to use
electricity until it is turned off with the K
button.
If you would like to open the door at
the end of the program, then make
sure that you open the door fully.
Otherwise steam from the
dishwasher could damage the edge
of the counter top because the fan is
no longer running.
^ Unload the dishwasher.
Dishes tend to break and chip more
easily when they are hot.
Allow the dishes to cool until they are
comfortable enough to handle before
unloading them.
The dishes will cool much faster if you
open the door when the program has
ended.
^ Unload the lower basket first, then
the upper basket and then the cutlery
tray (depending on the model).
This will prevent water from the upper
basket and cutlery tray from dripping
onto dishes in the lower basket.
Preparing your appliance for
an extended vacation
If you elect to turn off the water to your
home for an extended period of time,
please note that this may not be
enough to reduce the risk of a leak.
To be completely safe, you must
turn off the water supply to each
individual appliance. This means
under the sink for a dishwasher, at
the laundry bib for your washer, etc.
Use
31