Frequently Asked Questions; Technical Faults - Miele Classic G 4225 SC Operating Instructions Manual

,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.

Technical faults

Problem
After turning on the
dishwasher with the K
button, the Start/Stop
indicator light does not
flash.
The dishwasher stops
during a program.
The indicators
Intake/Drain and Rinse
aid flash simultaneously.
The time display shows
fault FXX.
In addition, the drain
pump may run even
when the door is open.

Frequently asked questions

Possible fault
The dishwasher is not
plugged in.
The circuit breaker has
tripped.
The circuit breaker has
tripped.
There may be a technical
fault.
Fault F70:
The waterproof system
reports a fault.
Solution
Insert the plug.
Reset the circuit breaker
(see data plate for the
correct fuse rating).
– Reset the circuit
breaker (see data plate
for the correct fuse
rating).
– If the circuit breaker
trips again, contact
Miele.
– Press the K button to
turn the dishwasher off.
After a few seconds:
– Turn the dishwasher
on.
– Use the Program
button to select the
desired program.
– Press the Start/Stop
button.
If the indicator lights flash
again, there is a technical
fault.
– Contact Miele.
– Close the water tap.
– Contact Miele .
39