Energy Management; At The End Of The Program - Miele G6835SCI Operating Instructions Manual

Table of Contents

Advertisement

Operation

Energy management

To save energy, the dishwasher will
switch off automatically 10 minutes af-
ter the last time a button has been
pressed or after the end of a program.
 Press the  button to switch the
dishwasher back on.
The dishwasher will not turn off auto-
matically if the time of day display has
been activated (see "Settings menu -
Time of day").
The dishwasher will not switch off
while a program or the FlexiTimer is
running or if there is a fault.
52

At the end of the program

The program has finished when  
appears in the display and the door has
opened slightly (if applicable).
In the
QuickIntenseWash
door will not open until a few minutes
after the program has finished.
The drying fan may continue to run for
a few minutes at the end of the pro-
gram.
 Open the door fully so that the door
locking pins retract again.
You can now empty the dishwasher.
If you have deactivated the auto-
matic door opening function (see
"Settings menu, AutoOpen"), but
would still like to open the door at
the end of the program, make sure
that you open the door fully.
Otherwise steam from the dish-
washer could damage the edge of
the counter because the fan is no
longer running.
End
program, the

Advertisement

Table of Contents
loading

Table of Contents