Removing The Rear Shock Absorber - Yamaha WR250F(D) Owner's Service Manual

REAR SHOCK ABSORBER

REMOVING THE REAR SHOCK ABSORBER

Order
Hold the machine by placing the suitable stand
under the engine.
Seat and side cover
Silencer
Drain the coolant.
Catch tank breather hose
Catch tank hose
Air induction hose (air cut-off valve-air filter case)
Cylinder head breather hose
Battery
Disconnect the starter relay coupler.
Starter motor lead
1 Locking tie
Part name
6-36
REAR SHOCK ABSORBER
Q'ty
Refer to "HANDLING NOTE".
Refer to "REMOVING THE SEAT, FUEL
TANK AND SIDE COVERS" section in the
CHAPTER 3.
Refer to "REMOVING THE EXHAUST PIPE
AND SILENCER" section in the CHAPTER 3.
Refer to "CHANGING THE COOLANT" sec-
tion in the CHAPTER 3.
Disconnect at the catch tank side.
Disconnect at the catch tank side.
Disconnect at the air filter case side.
Disconnect at the air filter case side.
Refer to "CHECKING AND CHARGING THE
BATTERY" section in the CHAPTER 3.
Disconnect at the starter relay side.
4
Remarks