Idle Speed Adjustment; Muffler Inspection; Silencer Fiber Replacement - Yamaha YZ125(R)/LC Owner's Service Manual

Yz series
Table of Contents

Advertisement

IDLE SPEED ADJUSTMENT/MUFFLER INSPECTION/

SILENCER FIBER REPLACEMENT

3-15
EC35M010

IDLE SPEED ADJUSTMENT

1. Start the engine and thoroughly warm it up.
2. Adjust:
9 Idle speed
Adjustment steps:
9 Loosen the locknut 1.
9 Turn the throttle stop screw 2 until the en-
gine runs at the lowest possible speed.
9 Tighten the locknut.
To increase idle speed ¡ Turn the throttle
To decrease idle speed ¡ Turn the throttle
EC35P030

MUFFLER INSPECTION

1. Inspect:
9 O-ring 1
Damage ¡ Replace.
NOTE:
Install the O-rings with their depressed a facing
outward.
EC35R050
SILENCER FIBER REPLACEMENT
1. Remove:
9 Side cover (right)
9 Bolt (silencer) 1
9 Silencer 2
9 Bolt (fiber) 3
INSP
ADJ
stop screw 2 2 in.
stop screw 2 2
out.

Advertisement

Table of Contents
loading

Table of Contents