Table of Contents
Advertisement
setup
Press the Function Setup switch.
1.
Main setup menu is displayed on the monitor screen.
Select the function
by moving up or
down direction of
function setup switch.
2.
Select a desired function using the Function Setup switch.
Place the cursor over a desired item.
3.
Set up a selected item by using the Function Setup switch.
4.
To finish the setting, select 'EXIT' and press the Function Setup switch.
An item with the
M
and press the Function Setup switch.
An item with the - - - icon is unavailable due to function settings.
leNs
Using this function, you can control the screen brightness.
1.
When the SETUP menu screen is displayed,
select'LENS'by using the Function Setup
switch so that the arrow indicates'LENS'.
2.
The Lens mode has sub menu site as listed
below.
- BRIGHTNESS : Adjusts the video brightness.
- FOCUS ADJ : To adjust the lens focus correctly, you must activate the Focus
Settings mode. To activate the Focus Settings mode, adjust the lens focus,
and then deactivate the settings mode.
- You can adjust the shutter value of ESC shutter mode.
20_ setup
MAIN SETUP
▶ 1.LENS
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.SSNR3
6.DAY/NIGHT
7.PROFILE
8.SPECIAL
9.EXIT
icon also has sub menus. To select a sub menu, select an item with the icon
DC
ATW
OFF
ON
AUTO
BASIC
SAVE
MAIN SETUP
▶ 1.LENS
2.EXPOSURE
Change the status
by moving the
setup switch left or
right.
DC
Advertisement
Table of Contents
