Table of Contents
Advertisement
introduction
COmpONeNT NAmes AND fUNCTIONs
OVeRVIeW
⓬
⓫
❿
➒
➑
Dome Cover
❶
shield Case
❷
Pan Base : control panning angle of camera
❸
3.9 Vari-focal Lens Module 2.8 ~ 11.0mm (F1.2)
❹
Function Setup Switch : Display the OSD menu and move the cursor up, down,
❺
Video Output Terminal to Monitor
❻
Rotate base : control rotating angle of camera.
➐
Power Input Connector
➑
Ground Terminal
➒
D & N Input Terminal : You can switch to Day & Night Mode by connecting
❿
MD Output Terminal: Motion detection signals are output through this terminal.
⓫
Video Output Jack
⓬
M
Be sure to connect the Day & Night input terminal to GND when using an external input.
12_ introduction
➌
2
❶
left,and right amend or confi rm changes.
an external signal to this terminal.
5
➐
➏
4
Advertisement
Table of Contents
