Advertisement
Arm Alarm System
On the Remote Control, press the ON button. The LED on the Remote Control will
temporarily turn on. This can be done from outside the house or other protected
structure.
Disarm Alarm System
On the Remote Control, press the OFF button. The LED on
the Remote Control will temporarily turn on. This can be
done from outside the house or other protected structure.
Problem
When system is armed,
one sensor does not sound
or signal Main Unit when
Magnet Strip is moved.
One Sensor continues to
sound alarm even through
the door is closed.
Main Unit does not detect
any intrusions from any
Sensors.
1.
Periodically test each Sensor and Main Unit for alarm indication and sound.
2.
Periodically test each Remote Control for Main Unit activation and
deactivation.
3.
Replace Main Unit batteries at least once a year. Replace other batteries as
required.
SKU 94799
Troubleshooting
Possible Cause
1.
Sensor is turned Off.
2.
Battery is dead.
3.
Main Unit is turned Off.
Magnetic Strip is placed too
far from Sensor.
1.
Main Unit batteries are
dead.
2.
Main Unit is placed too
far from the Sensors.
Maintenance
For technical questions, please call 1-800-444-3353
Remote Control
Probable Solution
1.
Turn Sensor On.
2.
Replace battery.
3.
Turn Main Unit On.
Move Magnetic Strip to within
¼" of the Sensor.
1.
Replace batteries.
2.
Move Main Unit closer to
the Sensors.
Page 6
Advertisement
