Oster Electronic Wine Vacuum Cork User Manual page 8

Note: Most vacuum seals lose their vacuum over time. With
our unique Two Stage process, the device senses this loss in
pressure and reactivates the 2nd stage automatically to
ensure a better vacuum seal.
Converting the Temperature from
Fahrenheit to Celsius
(The default temperature unit is Fahrenheit)
1 Press and hold the temperature display button for about
2 seconds in stand by mode to activate the display.
2 Next press and hold the temperature display button for
about 5 seconds. The display will then switch to show
the temperature in degrees Celsius. You can toggle from
F to C or C to F again by pressing and holding for
another 5 seconds.
The back light remains on for another 5 seconds during
this phase. The display will then completely shut off after
60 seconds.
Automatic Tilt Shut Off
Do not tilt the bottle while the
vacuum is in use. If the bottle is tilted
beyond 45 degrees, the automatic
tilt shutoff feature stops the vacuum
process. This helps avoid spills. The
Display will show "– – – – ", as shown
in fi gure 5. The blue back light will
remain on for another 5 seconds
then turn off but the display will
continue to show "– – – – ". If this happens
refer to the FAQ's section for help.
8
www.oster.com
fi gure 5