Oster Electronic Wine Vacuum Cork User Manual page 6

Operating the Wine Vacuum Cork
1 Remove bottom cap. Fully place the
wine vacuum cork on top of the neck
of an opened bottle of wine. Hold
the bottle of wine securely with
one hand and push the unit down
fi rmly and twist slightly to secure
the seal with the other hand. This
will activate the pump as shown in
fi gure 1. Repeat if necessary.
Note: It is not necessary to press
any buttons to activate the pump.
Once vacuum process starts, you
can release the vacuum cork.
Vacuum process has two stages.
Stage One
The automatic vacuum pump activates, evacuating excess
air from inside the wine bottle. The "o" icon will move across
the display while the motor is running as shown in fi gure 2.
The blue back light will remain on during this time.
6
www.oster.com
fi gure 1
fi gure 2