Cleaning And Lubricating The Drive Chain - Yamaha PW80(W) Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Tightening torques:
Locknut:
6.5 Nm (0.7 m·kgf, 4.7 ft·lbf)
Axle nut:
1
60 Nm (6.0 m·kgf, 43.4 ft·lbf)
4. Adjust the brake pedal free play.
2
(See page 6-15.)
3
4
5
6
7
8
9
Cleaning and lubricating the
drive chain
The drive chain must be cleaned and
lubricated at the intervals specified in
the periodic maintenance and lubrica-
tion chart, otherwise it will quickly wear
out, especially when riding in dusty or
wet areas. Service the drive chain as
follows.
CAUTION:
The drive chain must be lubricated
after washing the motorcycle and
riding in the rain.
1. Remove all dirt and mud from the
drive chain with a brush or cloth.
NOTE:
For a thorough cleaning, have a
Yamaha dealer remove the drive chain
and soak it in solvent.
2. Spray Yamaha Chain and Cable
Lube or a high-quality spray-type
drive chain lubricant on both sides
and on the middle of the chain,
making sure that all side plates
and rollers have been sufficiently
6-18
oiled.
EAU23013
ECA10581