Adjustment; Footrest Height Adjustment; Ph904A And Phal4A Front Riggings - Invacare Formula CG Seating User Manual

6 Adjustment

WARNING
After ANY adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely - otherwise
injury or damage may result.
While the wheelchair is moving, minimum ground clearance for the front rigging is three inches. If the wheelchair is not moving,
the front rigging MUST maintain a minimum of one inch ground clearance - otherwise personal injury and damage may result.
CAUTION
As with any vehicle, the wheels and tires should be checked periodically for cracks and wear, and should be replaced.

6.1Footrest Height Adjustment

WARNING
While the wheelchair is moving, minimum ground
clearance for the front rigging is three inches. If the
wheelchair is not moving, the front rigging MUST
maintain a minimum of one inch ground clearance -
otherwise personal injury and damage may result.

PH904A and PHAL4A Front Riggings

1. Loosen, but DO NOT remove, the lug bolt and locknut that secure
the lower footrest to the footrest support.
2. Reposition the lower footrest to the desired height.
3. Securely tighten the lug bolt and locknut that secure the lower
footrest to the footrest support.
4. Repeat STEPS 1-3 for the opposite side of the wheelchair footrest,
if necessary.
Part No 1143155
PH904A style front rigging shown. PHAL4A front

rigging adjusts the same way.
Footrest
Support
Lug Bolt
FIGURE 1
63
6 ADJUSTMENT
Locknut
Lower Footrest
Footrest Height Adjustment
Invacare® Formula™ CG Seating