Removal steps of the DC-in cable assembly and tablet base cover assembly
Step
Screw (quantity)
1
M2 × 3.5 mm, flat-head, nylon-coated (1)
Applying labels to the tablet base cover assembly
On the failing base cover, there might be some labels of several kinds. If the new base cover FRU is shipped
with those labels, apply them to the new cover after replacement. For the labels which are not shipped with
the new base cover, peel them from the old base cover and adhere them to the new one.
1
WWAN MAC label
2
Non-encryption label
3
Asset tag
4
Brazil ANATEL label
Some other labels, including the MTM label, are located on both sides of the two label trays
labels, peel them from the old label trays and adhere them to the new ones.
64
Hardware Maintenance Manual
Color
Black
5
Israel label for WLAN and Bluetooth
6
Israel label for WWAN
7
Indonesia label
Torque
0.181 Nm
(1.85 kgf-cm)
a
. For those