Removing And Reinstalling The System Stand - Lenovo S710 Hardware Maintenance Manual

Figure 5. Removing the system stand hinge cover
6. To reinstall the system stand hinge cover, place the system stand hinge cover on the computer so that
the plastic tab on the hinge cover aligns with the corresponding hole in the computer.
7. Reinstall the screw to secure the system stand hinge cover to the computer.
Figure 6. Reinstalling the screw to secure the system stand hinge cover to the computer

Removing and reinstalling the system stand

Attention
Do not open your computer or attempt any repair before reading and understanding the "Important safety
information" in the Safety, Warranty, and Setup Guide that came with your computer. To obtain a copy of the
Safety, Warranty, and Setup Guide, go to:
http://www.lenovo.com/support
This section provides instructions on how to remove and reinstall the system stand.
68
Lenovo S710 All-In-OneHardware Maintenance Manual