Fru Lists - Lenovo IdeaCentre A520 Hardware Maintenance Manual

Step 16. Remove all the cables attached to the middle frame and the front bezel.
Step 17. Remove the 5 screws that secure the hinge to the middle frame and set the hinge aside.
Step 18. To install the new the LED panel:
a. Line up the holes on the hinge with the mounting holes on the new middle frame and secure it
with 5 screws.
b. Attach all the cables to the new LED panel middle frame and front bezel.
c. Attach the Wi-Fi card, Bluetooth module, power switch board, converter board, touch control
board, scalar board and front function board to the new LED panel middle frame and connect
all the cables to the new LED panel.
Step 19. Reattach the rear cover to the LED panel.
Step 20. Reattach the hinge to the chassis.
Step 21. Reconnect the scalar headphone input, scalar and DVI/HDMI cables to the motherboard.
Step 22. Reattach the base cover and secure it with the screws.

FRU lists

This chapter lists the information on the field replaceable units (FRUs).
Attention: Be sure to read and understand all the safety information before replacing any FRUs.
Notes: FRUs that have a 1 or 2 in the CRU column are Customer Replaceable Units (CRUs).
• 1– identifies parts that are fairly simple to replace, requiring few or no tools.
• 2– identifies parts that are slightly more difficult to replace.
• N-identifies parts that are not to be replaced by the customer.
.
Chapter 8 Replacing hardware
59