HP Surestore Tape Library Model 20/700 Installation Notes page 2

Expansion Frame Install
1.
2. Obtain key and open cartridge area door.
3. Remove the right rear cover (cover with window) by inserting the lock-down latch tool
Figure 1. Removing Right Rear Cover
Have the operator take the library and all drives offline and power off the tape library.
CAUTION: Lifting hazard. Two people are required to remove the rear cover.
(see "Special Tools") between rear cover and the tape library frame on the lower right-hand
side of cover to release cover lock-down latch (see Figure 1).
62108 2