HP Surestore Tape Library Model 10/180 Manual page 5

313670504 (Rev D)
b. Write down the policy name and click OK if an error
dialog box is displayed stating it "Could not find the
Policy File".
This policy name is used later in this procedure.
Add the Policy:
a. Click Add Policy Entry button.
The Policy Entry window is displayed.
b. Type:
http://<library IP>/libconnect.jar in the CodeBase
field, where library IP is the 12-digit library IP address
(Example: 123.456.789.012) or domain name.
Note: You must enter one policy entry for each library
you wish to access.
c. Click Add Permission button.
The Permissions window is displayed.
d. Pull down the Permission combo box and select
FilePermission.
e. Type the path/name of the file to be downloaded in the
TargetName field.
Example: c:\temp\release.prm
Note: Ensure you use path separators that are
appropriate for your operating system. They are:
/ for Unix
\ for Microsoft Windows
f. Pull down the Actions combo box and select read.
g. Click OK.
5