HP Surestore Tape Library Model 10/180 Manual page 3

Step 5
313670504 (Rev D)
You need to ask your System Administrator for this number.
a. Press MENU.
The NETWORK CONFIG MENU is displayed.
b. Arrow to SUBNET MASK and press SELECT.
An edit window is displayed.
Follow the directions on the Operator Panel for
entering and saving data.
c. Press MENU.
The NETWORK CONFIG MENU is displayed with
the information you entered.
d. Perform a reset to save the changes.
Set up your Library Name from the Operator Panel.
The library name is aliased to the IP Address by your
Network Administrator.
An alias is the logical mapping created between the library
and its IP Address.
a. Press MENU.
The NETWORK CONFIG MENU is displayed.
b. Arrow to LIBRARY NAME and press SELECT.
An edit window is displayed.
Follow the directions on the Operator Panel for
entering and saving data.
c. Press MENU.
The NETWORK CONFIG MENU is displayed with
the information you entered.
3