HP NetServer AA 4000 Manual page 9

Disable - NetBEUI Protocol
Enable - TCP/IP Protocol
Enable - Wins Client (TCP/IP)
Enable - Marathon Datagram Services
Enable - Marathon Ethernet Provider
Disable - MTCEtx driver
New Network Adapter (for dedicated backup CE network)
Disable - NetBEUI Protocol
Disable - TCP/IP Protocol
Disable - Wins Client (TCP/IP)
Enable - Marathon Datagram Services
Enable - Marathon Ethernet Provider
Disable - MTCEtx driver
After completing the adapter bindings, then configure a unique IP address for each
dedicated IOP NIC.
For dedicated backup CE NIC (one in each IOP because mirrored for AA), use the
Marathon manager in IOP1 and IOP2 to configure a second NIC into the CE.
Next, go into CE network properties and add an additional Marathon MTCETHR Virtual
Adapter. Set up the adapter bindings as follows.
Marathon MtcVnR (for internal communication between IOP1 and CE)
Enable – NetBEUI Protocol
Disable – TCP/IP Protocol
Disable – Wins Client (TCP/IP)
Marathon MtcVnR (for internal communication between IOP2 and CE)
Enable – NetBEUI Protocol
Disable – TCP/IP Protocol
Disable – Wins Client (TCP/IP)
Marathon MTCETHR Virtual Adapter (public LAN on CE)
Enable – NetBEUI Protocol
Enable – TCP/IP Protocol
Enable – Wins Client (TCP/IP)
Marathon MTCETHR Virtual Adapter (private backup LAN on CE)
Enable – NetBEUI Protocol
Enable – TCP/IP Protocol
Enable – Wins Client (TCP/IP)
Set up a separate IP address (different than the original CE user IP) for the dedicated
backup network. The dedicated backup network with IOP1, IOP2, CE1 and CE2 backup
12/08/99 Hewlett-Packard Co. 9